High performance · Urethane coating
SHIELD PRO 2306
Industrial durability with a non-yellowing finish.
Indoor & outdoorView product← All products
HIGH PERFORMANCE / EPOXY COATING
SHIELD PRO2305
Strength for demanding work.
High-build epoxy protection for steel and concrete in plants and factories. Strength and chemical resistance for demanding industrial service.
MATCHED BASE + HARDENER01
Built for demanding service
Strong protective film for industrial floors and structures.
02
Chemical resistance
An epoxy foundation for surfaces exposed to demanding working conditions.
03
Direct protection
Apply directly to properly prepared steel. For concrete we recommend a compatible epoxy primer to seal surface pores.
PLAN IN U.S. UNITS
How far does a kit go?
Concrete estimate · 30% application loss · 9.84 mils / 250 µm total dry film.
- Estimated coverage / U.S. gal
- ≈ 97 sq ft
- Estimated coverage / kit
- ≈ 410 sq ft
- Kit volume used for this estimate
- 4.23 U.S. gal 16 L · Part A + Part B combined
Concrete: allow 30% or more depending on porosity. We recommend an epoxy primer to seal surface pores. Primer quantity is separate.
Calculate my project →
BUILT FOR DEMANDING ENVIRONMENTS
Strength for
industrial service.
- Factory & industrial floors
- Plant steel & concrete structures
- Equipment & facility maintenance
Epoxy can yellow in sunlight. For an exterior finish that retains its appearance use a compatible urethane such as 2306 over 2305.
SHIELD PRO 2305 and 2306 share the coating technology supplied in Korea under the COVECOVE M800 name.
See industrial projects & Korean recognition ↗PRODUCT AT A GLANCE
The essentials.
- Components
- Part A + matching Part B
- Mixing ratio
- 5 : 1 by weight
- Standard kit
- 4.23 U.S. gal / 16 L · 24 kg · Part A + B combined
- TDS coating system
- 2 coats · 9.84 mils / 250 µm total dry film
- Application
- Brush · Roller · Spray
- Interior applications
- Furniture · Marble · Bathtubs · Tile
- Smooth tile & bathtubs
- Compatible epoxy primer required
APPLICATION OVERVIEW
Prepare. Mix. Protect.
Prepare & prime where required
Prepare the substrate. Smooth bathtubs and tile require a compatible epoxy primer before coating. Properly prepared steel can be coated directly. For concrete we recommend an epoxy primer to seal surface pores.
Mix
Mix only with 2305 Part B at 5:1 by weight.
Apply
Build the specified film and observe the recoat and cure schedule.
Use the matching hardener. Never interchange the Part B components. Follow the product instructions for mixing and working time.
Concrete preparation. We recommend a compatible epoxy primer to seal surface pores. Allow at least 30% application loss and increase for rough or porous surfaces. Primer and repair materials are separate. See surface guidance →
CUSTOM COLOR MATCHING
Make the finish yours.
Send a color code or physical sample for your project.
TECHNICAL RESOURCES
Before you begin.
Product instructions and application guidance for your work.
Technical data sheet · EnglishSHIELD PRO 2305 · PDF↓Technical data sheet · SpanishSHIELD PRO 2305 · PDF↓2305 + 2306 exterior floor guide · EnglishSHIELD PRO 2305 · PDF↓2305 + 2306 exterior floor guide · SpanishSHIELD PRO 2305 · PDF↓Request safety data sheet (SDS)SHIELD PRO 2305 · Available on request↗
Also in the range.
View all products
General purpose · Epoxy coating
SHIELD PRO 2307
Practical epoxy protection for routine service.
Indoor focusView productYOUR NEXT PROJECT
Let’s talk about your surface.
Get help with SHIELD PRO 2305 and your project requirements.